1-1 Introduction
Machine Features
1
This is a signmaking machine that adds cutting features to a printer capable of high image quality, for a machine that
can accommodate a wide variety of uses, ranging from the creation of stickers and cut-out text and small-lot label
printing to the production of panels, outdoor signs, and more.
This makes possible not only use as either a printer or a cutting machine, but also enables consecutive
printing and cutting. Using the crop-mark feature makes it possible to perform alignment and carry out
cutting when you want to reload printed media that has been detached for lamination or the like.
A built-in print server enables direct connection to a network.
This machine has a built-in media heating system composed of a print heater to improve ink adhe-
sion and speed up drying and a dryer to speed up drying of the media after printing. This enhances
productivity by enabling support for more types of media.
A software raster image processor (RIP) is included as a standard feature. It takes output data such
as a PostScript file received from a program, performs raster image processing on the computer, and
outputs the data to the machine.
Installing a media take-up system (available separately) enables automatic take-up of the media
during printing. This enables unattended operation at night and lengthy printing to be accomplished
efficiently.
About the Notation Used in This Manual
This document is the user's manual for four models: the VP-540i and VP-300i ECO-SOL MAX ink models and the VP-540i
and VP-300i AQUEOUS PIGMENT ink (FPG2) models. This document uses the following notation to distinguish between the
models or ink types where necessary.
To distinguish between the different sizes
VP-540i
VP-300i
To distinguish between the different ink types
Models using ECO-SOL MAX ink
Models using AQUEOUS PIGMENT ink (FPG2)
Also, most of the figures in this document depict the 54-inch models.
24
–
54-inch models
–
30-inch models
–
ECO-SOL MAX ink models
–
AQUEOUS PIGMENT ink models