Table of Contents
Advertisement
4-9 Performing Printing and Cutting Separately
BASE POINT
ALIGN POINT 1
W1100 mm
B1
This indicates that the base point and
align point 1 have been set.
Repeat steps
Send the cutting data and perform cutting.
About Align Points
The numbers for align points are determined with reference to the location of the base point. You cannot set an align point
unless you specify a base point. Redoing the setting for the base point clears any align points that have been set.
Correcting Misalignment for Printing and Cutting When Using Crop Marks
Procedure
1.
Check the setting for the [AUTO ENV. MATCH] menu item.
Make sure the [AUTO ENV. MATCH] menu item is set to "ENABLE."
4
P. 84, "Executing Environment Matching Automatically"
2.
Execute the [ADJUST BI-DIR] menu item.
Load the media.
P. 32, "Loading Media"
P. 82, "How to Load Sheet Media"
Perform bidirectional adjustment.
P. 73, "Correcting for Misalignment in Bidirectional Printing"
P. 74, "Correcting for Misalignment in Bidirectional Printing More Precisely"
98
Press
.
Press
.
The number of the align point you set is automatically determined.
Press
.
Press
to go back to the original screen.
through
to specify other align points as required.
Advertisement
Table of Contents
