If Ink Runs Out - Roland VersaCamm VP-540i User Manual

A signmaking machine for eco-sol max & aqueous pigment ink models
Hide thumbs Also See for VersaCamm VP-540i:
Table of Contents

Advertisement

2-5 If Ink Runs Out

If Ink Runs Out
When ink runs out, a warning beep sounds and printing pauses (unless the default settings have been changed). Pull out
the empty cartridge and insert a new one. Printing resumes.
Procedure
1
2
3
2
Pull out the empty cartridge and immediately insert the new one.
Important Notes on Replacing Cartridges
Be sure to replace with an item of identical type. Never mix items of different types.
Never allow the machine to stand with an ink cartridge removed. The print heads may become
clogged.
Never insert or remove a partially used ink cartridge.
Never remove an ink cartridge suddenly while the printer is in operation.
When printing is paused, the coloring at the seam may be altered when printing resumes. Before you
perform lengthy printing, check the amount of ink remaining in the ink cartridges.
WARNING
44
The slot number for the empty cartridge flashes.
4
○ Keep the labeled side face up.
○ Insert and remove slowly, one at a time.
○ Insert firmly, as far as it will go.
Never store ink, cleaning fluid, or discharged fluid in any of the following loca-
tions.
Any location exposed to open flame
Any location where high temperature may occur
Near bleach or any other such oxidizing agent or explosive material
Any location within the reach of children
Fire may be a danger. Accidental ingestion by children may pose a health hazard.
Gently shake the new cartridge.
Replace with an item of identical type
Insert into the slot of the matching color.
and color.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Versacamm vp-300i

Table of Contents