Friction Pad; Paper End Sensor - Ricoh RMY-P1 Field Service Manual

4. Exit the SOM.

Friction Pad

1. Remove the paper tray unit from the machine before removing the friction pad.
2. Friction pad [A] (2 hooks, spring)
When reinstalling the friction pad, do it in this order:
1. Replace the spring.
2. Insert the right side of the friction pad first, followed by the left side.
3. Gently push the friction pad down into the slot and then pull forward very slightly.

Paper End Sensor

1. Pull out the standard paper tray.
2. Front cover (page 29 "Front Cover")
3. AIO
4. Set the machine with the rear side facing down, resting on the table.
5. Paper end sensor [A] (3 hooks, x 1)
Paper Feed
43