Turning On/Off The Heater Of The Perfect Binder; Printing Operations - Taking Out Printed Sheets From The Tray Of Finisher Fs-532 - Konica Minolta bizhub Press 1250P Additional Information

5

Printing Operations - Taking Out Printed Sheets From the Tray of Finisher FS-532

5.8 Printing Operations - Taking Out Printed Sheets From the Tray of
Finisher FS-532
The primary (main) tray, secondary (sub) tray, and folder tray of Finisher FS-532 have a limit in capacity.
When the limit set up for each tray is exceeded, the machine detects that the tray is filled up and automatically
stops printing.
d
Reference
The loading capacity of Finisher FS-532 primary (main) tray is determined according to output paper sizes
and options used in printing; however, the machine can be set to stop printing only when the lower limit sen-
sor of the primary (main) tray detects the full load. Contact your service representative, if desired.
This section describes how to take out printed sheets from the tray in the output that has automatically been
suspended, and how to cancel the suspended output. Also, the description includes how to manually sus-
pend the output and to take out the printed sheets from the tray.
For the subsequent procedure, see "4.10.4 Taking Out Printed Sheets From the Primary (Main) Tray Sus-
pended Automatically" of [User's Guide - Main Body].
5.9 Printing Operations - Using Perfect Binder PB-503
This section selectively describes the changed contents of specifications in perfect binding.
-
Paper tray
– Body: main body tray (Tray 1, Tray 2), Paper Feeder Unit PF-703 (Tray 3 to Tray 11), Paper Feeder
Unit PF-706 (Tray 3 to Tray 8)
– Cover: main body tray (Tray 1, Tray 2), Paper Feeder Unit PF-703 (Tray 3 to Tray 11), Paper Feeder
Unit PF-706 (Tray 3 to Tray 8), Perfect Binder PB-503 cover tray (cover print unavailable), the up-
per/lower tray of the post inserter of Folding Unit FD-503 (cover print unavailable), Large Capacity
Post Inserter PI-PFU (cover print unavailable)
-
Cover print
– When feeding cover from a main body tray (Tray 1, Tray 2), Paper Feeder Unit PF-703 (Tray 3 to Tray
11), or Paper Feeder Unit PF-706 (Tray 3 to Tray 8), both simplex print and duplex print are enabled.
Covers fed from Perfect Binder PB-503 cover tray, the upper/lower tray of the post inserter of Folding
Unit FD-503, or Large Capacity Post Inserter PI-PFU cannot be printed.
If a set of A4 v or 8.5 e 11 v body size is bound using a cover fed from the main body tray (Tray 1, Tray 2),
Paper Feeder Unit PF-703 (Tray 3 to Tray 11), or Paper Feeder Unit PF-706 (Tray 3 to Tray 8), the maximum
thickness of the book will be less than 30 mm.
- Cover Trim OFF: 460 - (216 e 2) = 28 mm
- Cover Trim ON: 460 - (216 e 2) - (5 mm in trimming width) = 23 mm
5.9.1

Turning On/Off the Heater of the Perfect Binder

To turn off the heater of the perfect binder
When the job using perfect binder is completed, the heater of the perfect binder will automatically be turned
off in one minute.
The heater will also be turned off automatically in one minute if any operation has not been made on the Per-
fect Binder PB-503 after completion of the warmup.
The heater can be turned off manually by pressing the heater switch for the perfect binder [OFF] on the Ma-
chine Screen while warming up or ready for operation.
Pressing the heater switch for the perfect binder [OFF] will not function if any perfect binding jobs are entered.
5-24 bizhub PRESS 1250/1052, bizhub PRESS 1250P, bizhub PRO 951 Additional Information
5.8