Adjustment Of The Installation Position Of The Shutter Drive Gear - Konica Minolta bizhub 500 Service Manual

4. MECHANICAL ADJUSTMENT
[1]
[2]
[4]
4.2

Adjustment of the Installation Position of the Shutter Drive Gear

[1]
22
[3]
4349f3c002na
[5]
4349f3c003na
[2]
[1]
4349f3c004na
Confidential – for internal use only, do not distribute
Field Service Ver.1.0 Feb. 2006
4. Open the Front Door.
5. Turn the knob [1], and move the stapler
forward.
6. Loosen the screw [2], and remove the
cover [3].
7. Loosen two adjustment screws [2] and
move the Stapler Unit [3] in the direction
of the arrow to make the adjustment.
8. Make another print and check the staple
position.
1. Set three gears.
NOTE
• Set the gears so that the marks on
Gears 1 and 3 [1] are aligned with the
rib of Gear 2 [2] as shown on the right.