Dip Switches; Controller Board; Engine Board - Gestetner G056 Service Manual

DIP SWITCHES

5.8 DIP SWITCHES

Controller Board

DIP switch 2 (Bit 1) on the controller is used for error recovery after a firmware
updating procedure failed.
NOTE: The default settings of the DIP switches are all 'OFF'.
NIB

Engine Board

DIP switch 1 on the engine board is for factory use only. Do not change the setting.
G056/G058
Controller Board
SW2
5-18
Engine Board
Bit 4 3 2 1 OFF
ON
G056T500.WMF
SM