Omron RX Series User Manual page 331

Real Frequency Monitor [d008]
Use this function to display the real frequency of the motor when a motor with an encoder is connected
to a load and the PG Board (Model: 3G3AX-PG01) is used. This parameter does not depend on the
control method setting.
Parameter No.
d008
Note 1 Set the Number of Encoder Pulses (P011) and the 1st/2nd Motor Pole Number (H004/H204) correctly.
2 This parameter does not depend on the 1st Control Method (A044).
Torque Reference Monitor [d009]
Use this function to display the torque command value that is currently input when torque control is
selected for sensor vector control.
The data display LED "%" is lit while the value of d009 is displayed.
Parameter No.
d009
Torque Bias Monitor [d010]
Use this function to display the current torque bias amount setting when sensor vector control is
selected.
The data display LED "%" is lit while the value of d010 is displayed.
Parameter No.
d010
High-function General-purpose Inverter 3G3RX-V1 User's Manual (I578-E1)
Function name
Real Frequency Monitor
Function name
Torque Reference Monitor
Function name
Torque Bias Monitor
Data
0.00 to 99.99: During forward run
(Displayed in increments of 0.01Hz)
100.0 to 400.0: During forward run
(Displayed in increments of 0.1Hz)
–99.9 to –0.0: During reverse run
(Displayed in increments of 0.1Hz)
–400 to –100: During reverse run
(Displayed in increments of 1 Hz)
Data
–200. to 200. (Displayed in increments of
1%)
Data
–200. to 200. (Displayed in increments of
1%)
7 Detailed Functions
Default data Unit
– Hz
Default data Unit
– %
Default data Unit
– %
7 - 5
7