Omron RX Series User Manual page 381

2-step Acceleration/Deceleration Function
• Use this function to switch between two acceleration/deceleration time settings or change the
acceleration/deceleration time on the way during acceleration/deceleration.
• The acceleration/deceleration time switching method can be selected from the following three.
Switching via a multi-function input terminal
Automatic switching at a specific frequency
Automatic switching only during forward/reverse switching
Note that, automatic switching to 2-step acceleration/deceleration is disabled when the 3rd control
method is selected.
• To switch via a multi-function input terminal, set one of C001 to C008 to 09 (2CH).
Parameter No.
A092
A292
A392
A093
A293
A393
A094
A294
A095
A295
A096
A296
Related functions
*1 To enable the switching to the 2nd/3rd control, allocate one of the Multi-function Input S1 to S8 Selection (C001
to C008) to 08 (SET) or 17 (SET3) and turn ON that terminal.
*2 The default data was changed from the previous model.
High-function General-purpose Inverter 3G3RX-V1 User's Manual (I578-E1)
Function name
1st Acceleration Time 2
0.01 to 99.99
2nd Acceleration Time
*1
2 100.0 to 999.9
1000. to 3600.
3rd Acceleration Time
*1
2
1st Deceleration Time 2
0.01 to 99.99
2nd Deceleration Time
*1
2 100.0 to 999.9
1000. to 3600.
3rd Deceleration Time
*1
2
1st 2-step 00: Switched via 2CH terminal
Acceleration/Deceleration
Selection
01: Switched via setting (Example 2)
2nd 2-step
02: Switched only during
Acceleration/Deceleration
*1
Selection
1st 2-step Acceleration
Frequency
0.00 to 99.99
2nd 2-step Acceleration
100.0 to 400.0
*1
Frequency
1st 2-step Deceleration
Frequency
0.00 to 99.99
2nd 2-step Deceleration
100.0 to 400.0
*1
Frequency
F002, F202, F302, F003, F203, F303, C001 to C008
Data
(Example 1)
forward/reverse switching
(Example 3)
7 Detailed Functions
Default data Unit
*2
s
10.00
*2
s
10.00
00 –
0.00 Hz
0.00 Hz
7 - 55
7