Omron RX Series User Manual page 474

7 Detailed Functions
• In the Operation Selection at Idle Mode Detection (P048), set how the inverter should operate when
the network is in the Idle (communications standby) mode.
Parameter No.
P044
P045
P046
P048
P049
P160 to P169
P170 to P179
P190
P192
DriveProgramming Unser Parameters
• Use these parameters to set user-defined values available with the DriveProgramming function.
• Changes made to DriveProgramming User Parameters via the Digital Operator are reflected on the
user variables (U00 to U31) used in the program.
• For details, refer to "DriveProgramming User
Parameter No.
P100 to P131
7 - 148
Function name
Communications Error
0.00 to 99.9
Detection Timer Setting
00: Trip
01: Trip after deceleration stop
Operation Selection at
Host Communications 02: Ignore
Error
03: Free-run stop
04: Deceleration stop
Assembly Instance
00 to 20
Number
00: Trip
01: Trip after deceleration stop
Operation Selection at
02: Ignore
Idle Mode Detection
03: Free-run stop
04: Deceleration stop
Number of Poles for 0/2/4/8/10/12/14/16/18/20/22/24/26/
Rotation Speed Setting 28/30/32/34/36/38
Option I/F Flexible
Format Output Register 0000 to FFFF
1 to 10
Option I/F Flexible
Format Input Register 1 0000 to FFFF
to 10
CompoNet Node
0 to 63
Address
DeviceNet MAC ID 0 to 63
Function name
0. to 9999.
DriveProgramming User
Parameter U00 to U31
1000 to 6553 (10000 to 65535)
High-function General-purpose Inverter 3G3RX-V1 User's Manual (I578-E1)
Data
s Manual (I580)".
'
Data
Default data Unit
1.00 s
00 –
01 –
00 –
0 –
0000 –
0000 –
00 –
63 –
Default data Unit
0. –