Omron RX Series User Manual page 232

5 Basic Settings
Parameter
No.
F002 1st Acceleration Time 1
F202
2nd Acceleration Time 1
F302
3rd Acceleration Time 1
F003 1st Deceleration Time 1
F203
2nd Deceleration Time 1
F303
3rd Deceleration Time 1
Acceleration/Deceleration Time
P031
Input Type
Related functions
*1 To enable the switching to the 2nd Acceleration Time 1/3rd Acceleration Time 1 and to the 2nd Deceleration
Time 1/3rd Deceleration Time 1, allocate one of the Multi-function Input S1 to S8 Selection (C001 to C008) to
08 (SET) or 17 (SET3) and turn ON that terminal.
*2 The default data was changed from the previous model.
Additional Information
• If a short deceleration time is set, the amount of regeneration fed back during deceleration
becomes large. If the amount of regeneration exceeds the amount allowable for the inverter,
the deceleration time will be extended according to the Overvoltage Suppression Function
Selection During Deceleration (b130) setting, or an overvoltage will occur. In such a case, use
the regenerative braking function.
• For the regenerative braking function, refer to 5-12-2 Regenerative Braking Function on page
5-70.
5 - 36
Function name
Acceleration time from 0 to
maximum frequency
*1
0.01 to 99.99
100.0 to 99.99
*1
1000 to 3600
Deceleration time from maximum
frequency to 0
*1
0.01 to 99.99
100.0 to 99.99
*1
1000 to 3600
00: Digital Operator
01: Option 1
02: Option 2
03: DriveProgramming
A004, A204, A304, C001 to C008
High-function General-purpose Inverter 3G3RX-V1 User's Manual (I578-E1)
Default
Data
data
10.00
10.00
00
Unit
*2
s
*2
s
–