Omron RX Series User Manual page 573

DriveProgramming Function
The details of the main DrvieProgramming function are as follows.
Program
specifications
The main functions of the DriveProgramming Editor available in CX-Drive are as shown below.
Function
Programming
Compilation
Transfer
Debugging support
*1. Compilation is the process to generate an intermediate code after a program check.
For details, refer to "DriveProgramming User's Manual (I580)".
High-function General-purpose Inverter 3G3RX-V1 User's Manual (I578-E1)
Item
Programming
Flowchart and text language method
language
Windows computer
Input device (The supported operating systems are Windows XP SP3, Windows
Vista, and Windows 7.)
1024 steps max.: 6 KB
Program capacity
(1024 steps max. for a total of 5 tasks)
Functions supported in Inverter/Servo support tool CX-Drive
• Program editing and display
Programming
support function
• Program compilation (Program syntax check)
• Program downloading, uploading, and all clear
• Execution by interpreter
• Execution cycle: 2 ms/step (5 commands executable through 5-task
Execution format
parallel processing)
• Subroutine call supported (Nesting in 8 levels max.)
Supports the creation, editing, saving, reading, and printing of user programs.
Compiles a user programs.
Downloads a user program to the inverter, or
uploads a user program from the inverter.
Starts and stops the execution of a program.
This allows the user to check the inverter status monitor etc.
9 Overview of DriveProgramming
Specifications
Description
*1
9
9 - 3