Omron RX Series User Manual page 201

User Setting (b037 = 02)
• Displays only the parameters set in U001 to U012.
• In addition to U001 to U012, the parameter d001, F001, and b037 are displayed.
Data Comparison Display (b037 = 03)
• Displays only the changed parameters from the factory default settings.
However, the parameters for analog input adjustment (C081 to C083, C121 to C123) and Thermistor
Adjustment (C085) are not displayed.
• All monitor display parameters (d***) and F001 will be always displayed.
Basic Display (b037 = 04)
• Displays only the basic parameters.
• When this setting is enabled, the following parameters are displayed.
Parameter
No.
No.
1 d001
2 d002
3 d003
4 d004
5 F001
6 F002
7 F003
8 F004
9 A001
10 A002
11 A003
12 A004
13 A005
14 A020
15 A021
16 A022
17 A023
Related functions
High-function General-purpose Inverter 3G3RX-V1 User's Manual (I578-E1)
Function name
Output Frequency Monitor
Output Current Monitor
RUN Direction Monitor
PID Feedback Value Monitor
Output Frequency
Setting/Monitor
1st Acceleration Time 1
1st Deceleration Time 1
RUN Direction Selection
Frequency Reference Selection
RUN Command Selection
1st Base Frequency
1st Maximum Frequency
FV/FI Selection
1st Multi-step Speed Reference 0
Multi-step Speed Reference 1
Multi-step Speed Reference 2
Multi-step Speed Reference 3
U001 to U012
Parameter
No.
No.
18 A044 1st Control Method
19 A045 Output Voltage Gain
20 A085 Operation Mode Selection
Power Interruption/Undervoltage
21 b001
Restart Selection
Allowable Power Interruption
22 b002
Time
Overvoltage/Overcurrent Restart
23 b008
Selection
Overvoltage/Overcurrent Restart
24 b011
Standby Time
25 b037 Display Selection
26 b083 Carrier Frequency
27 b084 Initialization Selection
Overvoltage Suppression
28 b130 Function Selection During
Deceleration
Overvoltage Suppression Level
29 b131
During Deceleration
30 b180 Initialization Execution
Multi-function Output P1
31 C021
Selection
Multi-function Output P2
32 C022
Selection
Multi-function Relay Output (MA,
33 C036
MB) Operation Selection
5 Basic Settings
Function name
5 - 5
5