Omron RX Series User Manual page 121

Part
Precautions for Correct Use Precautions for Correct Use
• The color scheme of the Digital Operator keys was changed.
Operate the keys correctly according to the following information on the displays and colors.
Key
• Install or remove the Digital Operator with the power supply shut off.
Not doing so may result in failure.
High-function General-purpose Inverter 3G3RX-V1 User's Manual (I578-E1)
Name
Mode key When parameter is
displayed:
When data is displayed:
In individual input mode:
Regardless of the display, if you press the Mode key for 3 seconds or
more, the data of Output Frequency Monitor (d001) is displayed.
Enter key When parameter is
displayed:
When data is displayed:
In individual input mode:
Increment key Increases the parameter number or the set data value. Press and
hold the key to quickly increase the number or value.
Press the increment key and the decrement key simultaneously to
enter the individual input mode, where you can edit the value in each
digit independently.
Decrement key Decreases the parameter number or the set data value. Press and
hold the key to quickly decrease the number or value.
Press the increment key and the decrement key simultaneously to
enter the individual input mode, where you can edit the value in each
digit independently.
Name Previous model
RUN key Gray
STOP/RESET key Yellow
Mode key Blue
Enter key Yellow
Increment key Green
Decrement key Green
3 Operation and Test Run
Function
Moves to the beginning of the next
function mode.
Cancels the setting and returns to the
parameter display.
Moves the blinking position one digit to
the left, if not located at the left end. At
the left end, cancels the input data and
returns to the previous display.
Switches to the data display.
Enters and stores the set value (into the
EEPROM) and returns to the parameter
display.
Enters the value in the blinking position
and moves it one digit to the right.
3G3RX-V1
Green
Red
Blue (No change)
Yellow (No change)
Gray
Gray
3
3 - 5