Options; System Requirement - GeoVision GV-Compact DVR V2 User Manual

1.4 Options

Optional devices can expand your GV-Compact DVR V2's capabilities and versatility. Contact
your dealer for more information.
External IR Receiver
GV-GPS 232 Receiver
2.5" to 3.5" HDD Converter
GV-Relay V2
WiFi USB Adaptor
Power Adaptor of DC 12V,
5.0A

1.5 System Requirement

To access the Web interface of the GV-Compact DVR V2, it is required to use Microsoft
Internet Explorer 7.x or later.
Note: If you are using Microsoft Internet Explorer 8, additional settings are required. See
Settings for Internet Explorer 8 in Appendix C.
The external IR receiver, with a 5-meter cable (16.4 feet),
allows long-distance remote control of the GV-Compact DVR
V2.
GV-GPS 232 Receiver, with RS-232 interface, is a Global
Position System receiver. It can be applied to vehicle
tracking and location verification.
The HDD converter allows you to install a 2.5'' SATA HDD
into GV-Compact DVR V2.
Working with this module, GV-Compact DVR V2 can drive
the loads of relay outputs over 5 volts.
The WiFi USB Adaptor is designed to connect the GV IP
devices, such as GV-Video Servers or GV-Compact DVRs,
to the wireless network. This product complies with IEEE
802.11 b/g/n (Draft 3.0) standards for wireless networking.
The power adaptor is used to power on the Anti-Vibration
Model of ACC Version to test the connection.
Introduction
1
7