Advanced; Date And Time - GeoVision GV-Compact DVR V2 User Manual

4.8 Advanced

In this section, you can configure the settings of date and time, storage device, screen display,
and system password. In addition, you can view and upgrade the firmware.

4.8.1 Date and Time

The date and time settings are used for date and time stamps on the image.
SET BY: Select MANUAL to adjust the data and time by yourself, or NETWORK to
synchronize the date and time with a time server. If you select NETWORK, then the option
of SERVER appears. Use the on-screen keypad to enter the IP address of the time server.
DAY LIGHT SAVING: Automatically adjust the GV-Compact DVR V2 for daylight saving
time. Enter the Start and End time of daylight saving.
Note: The default setting with the time server can avoid the system time delay. If your
GV-Compact DVR is not networked or the time server is not enabled, the system time may
delay about 1.5 second every 24 hours. In such case, you could update the system time
manually to ensure exact recording time.
Also see 7.2.5 Playback of Daylight Saving Time Events.
68
Figure 4-40