Installing Hard Drive - GeoVision GV-Compact DVR V2 User Manual

3.5 Installing Hard Drive

The GV-Compact DVR V2 comes equipped with a 3.5" SATA hard drive bay for video
recording. Follow these steps to install the hard drive.
1. Make sure the unit is powered off.
2. For users of the Standard model, open the door of drive bay, push the hard drive inside,
and close the door.
Figure 3-15
3. For users of the Anti-vibration model, pull out the drive drawer, insert the hard drive in
the drawer, secure the hard drive with the 4 supplied screws, and push the drawer back in
the drive bay of the unit.
24
Figure 3-16