Advertisement
How to Load Default Settings for GV-Video Server,
GV-Compact DVR or GV-IP Camera
Article ID: GV-15-09-08-24
Release Date: 08/24/2009
Applied to
GV-Video Server (GV-VS02, GV-VS02A, GV-VS04A, GV-VS12)
GV-Compact DVR V1 and V2
GV-IP Camera V1
Summary
Among different models of GV-Video Servers, GV-Compact DVRs and GV-IP Cameras, the
time of loading default settings for each model can vary and the way the LEDs flash can also
be different.
Loading Default Settings for GV-Video Server
(GV-VS02, GV-VS02A and GV-VS04A)
The figure below is the front panel of GV-VS02. Since the front panels of GV-VS02,
GV-VS02A and GV-VS04A are very similar, refer to the figure and the instructions below to
load default values for the three models of GV-Video Servers.
GeoVision Inc.
1
Revision Date: 2009/8/25
Advertisement
Table of Contents
Related Manuals for GeoVision GV-Video Server
Summary of Contents for GeoVision GV-Video Server
- Page 1 How to Load Default Settings for GV-Video Server, GV-Compact DVR or GV-IP Camera Article ID: GV-15-09-08-24 Release Date: 08/24/2009 Applied to GV-Video Server (GV-VS02, GV-VS02A, GV-VS04A, GV-VS12) GV-Compact DVR V1 and V2 GV-IP Camera V1 Summary Among different models of GV-Video Servers, GV-Compact DVRs and GV-IP Cameras, the time of loading default settings for each model can vary and the way the LEDs flash can also be different.
- Page 2 3. Release the Load Default button. The process of loading default values is complete, and the GV-Video Server starts rebooting itself with all 3 LEDs turning off. 4. Wait until the Power and Ready LEDs turn on again. After this all the settings are returned to default values.
- Page 3 4. Wait until the Power and Ready LEDs turn on again. After this all the settings are returned to default values. Note: Before the Ready LED is on again, do not unplug the power cable; otherwise the loading of default values will fail. GeoVision Inc. Revision Date: 2009/8/25...
- Page 4 Refer to the figure and instructions below to load default settings for GV-IP Camera V1. Default Button 1. Press and hold the Default button for about 10 seconds. 2. Release the Default button. After this all the settings are returned to default values. GeoVision Inc. Revision Date: 2009/8/25...
Need help?
Do you have a question about the GV-Video Server and is the answer not in the manual?
Questions and answers