Chapter 7 Remote Recording And Playback; Remote Recording; Remote Playback - GeoVision GV-Compact DVR V2 User Manual

Chapter 7 Remote Recording and Playback

The Administrator can remotely start recording to the GV-Compact DVR V2 and play back the
recorded files over the TCP/IP network.

7.1 Remote Recording

To remotely enable the recording function to the GV-Compact DVR V2:
1. Make sure the hard drive is installed in the unit. See 6.8.3 Storage Settings.
2. If you like to set up the pre-recording, post-recording or audio recording, see 6.1.1 Video
Settings.
3. If you like to set up the schedule for video recording or I/O monitoring, see 6.5 Recording
Schedule.
4. If you like to configure the areas and sensitivity values for motion detection, see 6.1.2
Motion Detection.
5. If you want the recording to be triggered by an input device, configure the operation of I/O
devices. See 6.2.1 I/O Control.
6. To start recording and I/O monitoring, see 6.4 Monitoring.
The GV-Compact DVR V2 will start recording in case of motion detection, I/O trigger, or
during the scheduled time.

7.2 Remote Playback

These methods are available to play back the video files recorded at the GV-Compact DVR
V2:
•
Playback using the hard drive by installing it to the GV-System
•
Playback using the Remote ViewLog function over the TCP/IP network
•
Playback using the recorded files downloaded from built-in FTP Server
150