[UMTS Settings]
PIN number: Type the PIN number that is provided by your network operator.
Access Point Name (APN): Type Access Point Name that is provided by your network
operator.
Username: Type a valid username to enable the UMTS service from your network
operator.
Password: Type a valid password to enable the UMTS service from your network
operator.
Maximum Transmission Unit: Type the Maximum Transfer Unit (MTU). The default
value is 1500.
Retain UMTS Connection: Select this option to check the UMTS connection status and
use the drop-down list to specify the time length for check frequency. The GV-Compact
DVR V2 will start connection retry if disconnection is detected.
Check VPN Connection: Select this option to enable the Virtual Private Network (VPN)
connection. Enter the IP address of a VPN client in the Check Target IP Address field.
[ZigBee Settings] Enable the ZigBee application.
[3G Connection Status] Indicate the connection status of UMTS or VPN.
Remote Configurations
6
137
Need help?
Do you have a question about the GV-Compact DVR V2 and is the answer not in the manual?