Engine Specifications - Mercury Inboard 5.7L Manual

Specifications
NOTE: The use of non‑detergent oils, multi‑viscosity oils (other than as specified), non
FC‑W rated synthetic oils, low quality oils or oils that contain solid additives are specifically
not recommended.

Engine Specifications

Horsepower
Kilowatts
Displacement
Specified WOT RPM Range
Idle RPM in Neutral
Minimum Oil Pressure @ Idle
Minimum Oil Pressure @ 2000 RPM
Thermostat
Timing @ Idle
Firing Order
Electrical System
Alternator Rating ‑ Hot Operating Amps
Alternator Rating ‑ Cold Operating Amps
Recommended Battery Rating (Minimum)
1. Performance obtained and corrected in accordance with SAE J1228/ISO 8665 Crankshaft Power.
2. Measured using an accurate service tachometer with the engine at normal operating temperatures
3. A special procedure must be followed to adjust idle rpm. Consult your Authorized Mercury MerCruiser Dealer before attempting
this procedure.
4. Oil pressure must be checked with the engine at normal operating temperature.
Page 36
Models
1.
1.
2.
2.
4.
3.
5.7L Inboard
4200‑4600
4.
5.7L Tow Sport
260 270
194 201
5.7 L (350 cid)
4400‑4800
3.
650
41 kPa (6 psi)
124 kPa (18 psi)
71° C (160° F)
10° BTDC
1‑8‑4‑3‑6‑5‑7‑2
12 Volt Negative (‑) Ground
65 amp
72 amp
375 CCA, 475 MCA, or 90 Ah
90-860174050 JUNE 2005