Locate; Delete; Delete All; Hide/Show - Standard Horizon CP150 Owner's Manual

Figure 3.2.6 - DSC LOG - Distress Call Page
Use the ShuttlePoint knob up/down to move the selection through the list and left/right
to select active function:

Locate

Centers the map on the selected position.

Delete

Deletes selection position.

Delete All

Deletes all entries.

Hide/Show

Allows hiding/showing the selected points on the chart display. The default value of
the field is Yes (object shown on the map).

Position Request

Shows Position Request LOG page. When Position Request LOG page is active this
message changes to Distress Call LOG page.
3.2.7 NMEA DISPLAY Pages
Certain data fields will not operate unless the chartplotter is interfaced with another
NMEA instrument.

3.2.7.1 Display Page

'MENU' + "NMEA DISPLAY" + 'ENTER' + "DISPLAY" + 'ENTER'
It is possible to choose the page layout (the number of fields in the page) and the type
of data shown in each of the fields in the page as described in the previous Section
3.2.1. If the selected type of data is not received the field shows dashes.
Page 20
NOTE
GPS Chart 150