Replacing A Microprocessor And Heat Sink - IBM System x3850 X6 Installation And Service Manual

Hide thumbs Also See for System x3850 X6:

Table of Contents

10. Place the microprocessor on a static-protective surface. Remove the

11. If you are instructed to return the microprocessor, follow all packaging

Replacing a microprocessor and heat sink

This information provides instructions on how to replace a microprocessor and

To replace a microprocessor and heat sink, complete the following steps:

Attention: When you handle static-sensitive devices, take precautions to avoid

damage from static electricity. For details about handling these devices, see

"Handling static-sensitive devices" on page 46.

v Use the microprocessor installation tool that came with the new microprocessor

v Be extremely careful when handling the microprocessor, the microprocessor

System x3850 X6 and x3950 X6 Types 3837 and 3839: Installation and Service Guide

c. Gently twist the handle on the installation tool clockwise to the closed

position and lift the microprocessor out of the socket.

microprocessor from the installation tool by twisting the handle

counterclockwise.

Installation

instructions, and use any packaging materials for shipping that are supplied to

you. Do not return the microprocessor installation tool.

kit to remove the microprocessor from the server.

socket contacts are very fragile.

Installation tool

Microprocessor

System x3950 x6