806f010d-040dffff
The [NumericSensorElementName] has been disabled due to a detected fault.
Explanation: The drive 13 has been disabled (defunct) due to a fault detected by the controller.
May also be shown as 806f010d040dffff or 0x806f010d040dffff
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0164
SNMP Trap ID: 5
Automatically notify Support: Yes
User response:
1. Check IBM Support site for Service Bulletins/RETAIN tips related to your particular drive.
2. Check IBM Support site for firmware updates related to your particular drive.
3. Check for any other RAID related errors.
4. Replace the drive.
Related Links:
"Removing 2.5-inch and 1.8-inch hot-swap drives" on page 231
v
"Replacing 2.5-inch and 1.8-inch hot-swap drives" on page 232
v
806f010d-040effff
The [NumericSensorElementName] has been disabled due to a detected fault.
Explanation: The drive 14 has been disabled (defunct) due to a fault detected by the controller.
May also be shown as 806f010d040effff or 0x806f010d040effff
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0164
SNMP Trap ID: 5
Automatically notify Support: Yes
User response:
1. Check IBM Support site for Service Bulletins/RETAIN tips related to your particular drive.
2. Check IBM Support site for firmware updates related to your particular drive.
3. Check for any other RAID related errors.
4. Replace the drive.
Related Links:
"Removing 2.5-inch and 1.8-inch hot-swap drives" on page 231
v
"Replacing 2.5-inch and 1.8-inch hot-swap drives" on page 232
v
806f010d-040dffff • 806f010d-040effff
Appendix B. Integrated management module II (IMM2) error messages
703