IBM System x3850 X6 Installation And Service Manual page 953

806f040c-2b820018 [PhysicalMemoryElementName] Disabled on Subsystem [MemoryElementName].
Explanation: IMM has reported that Memory has been Disabled on DIMM 24 in Compute Book 2.
May also be shown as 806f040c2b820018 or 0x806f040c2b820018
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0131
SNMP Trap ID:
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
Related Links:
"Finding the UEFI (POST) error code" on page 1666
v
806f040c-2b82ffff [PhysicalMemoryElementName] Disabled on Subsystem [MemoryElementName].
Explanation: IMM has reported that Memory has been Disabled on Compute Book 2.
May also be shown as 806f040c2b82ffff or 0x806f040c2b82ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0131
SNMP Trap ID:
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
Related Links:
"Finding the UEFI (POST) error code" on page 1666
v
806f040c-2b820018 • 806f040c-2b82ffff
Appendix B. Integrated management module II (IMM2) error messages
935