IBM System x3850 X6 Installation And Service Manual page 547

80010002-2801ffff Numeric sensor SysBrd VBAT going low (lower non-critical) has asserted.
Explanation: The CMOS battery voltage has dropped below its specified threshold.
May also be shown as 800100022801ffff or 0x800100022801ffff
Severity: Warning
Alert Category: Warning - Voltage
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0476
SNMP Trap ID: 13
Automatically notify Support: No
User response: Replace the CMOS battery.
Related Links:
"Removing the system battery" on page 262
v
80010202-0701ffff Numeric sensor [NumericSensorElementName] going low (lower critical) has asserted.
Explanation: A Voltage has dropped below its specified threshold (sensor SysBrd 12V, SysBrd 3.3V, or SysBrd 5V).
May also be shown as 800102020701ffff or 0x800102020701ffff
Severity: Error
Alert Category: Critical - Voltage
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0480
SNMP Trap ID: 1
Automatically notify Support: Yes
User response:
1. (Trained service technician only) If the specified sensor is SysBrd 3.3V or SysBrd 5V, replace the system board.
2. If the specified sensor is SysBrd 12V, check the IMM event log for power-supply-related issues, and resolve those
issues. If the problem remains, (trained service technician only) replace the system board.
Related Links:
"Removing the standard I/O book" on page 221
v
80010202-2801ffff Numeric sensor SysBrd VBAT going low (lower critical) has asserted.
Explanation: The CMOS battery voltage has dropped below its specified threshold.
May also be shown as 800102022801ffff or 0x800102022801ffff
Severity: Error
Alert Category: Critical - Voltage
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0480
SNMP Trap ID: 1
Automatically notify Support: Yes
User response: Replace the CMOS battery.
Related Links:
"Removing the system battery" on page 262
v
80010002-2801ffff • 80010202-2801ffff
Appendix B. Integrated management module II (IMM2) error messages
529