Replacing A 1400-Watt Or 900-Watt Hot-Swap Power Supply - IBM System x3850 X6 Installation And Service Manual

2. Removing a 1400-watt hot-swap power supply.
3. Removing a 900-watt hot-swap power supply.
4. If you are instructed to return the power supply, follow all packaging

Replacing a 1400-watt or 900-watt hot-swap power supply

Use this information for instructions on how to replace a 1400-watt or 900-watt
hot-swap power supply.
Note: This information and instructions apply to both the 4-socket and the
8-socket servers.
248
System x3850 X6 and x3950 X6 Types 3837 and 3839: Installation and Service Guide
a. Press and hold the orange release tab to the left. Grasp the handle and pull
the power supply out of the server.
1400-watt ac
power supply
Power supply
release tab
b. Set the power supply aside.
c. Go to step 4.
a. Press and hold the orange release tab to the left. Grasp the power supply
handle and pull the power supply out of the server.
Spacer
Spacer
release tab
900-watt ac
power supply
Power supply
release tab
Note: You only need to remove the spacer if you are removing all of the
750-watt -48 V to -60 V dc power supplies or 900-watt power supplies and
installing 1400-watt power supplies.
b. Set the power supply spacer aside.
instructions, and use any packaging materials for shipping that are supplied to
you.