Remote Administration - NetComm NTC-6908 User Manual

Re emote Adm ministration
This facility is available b by clicking on the "Sy
Onc e Remote administra ation is enabled, you
featu ures.
To g get remote access, yo ou have to connect to
conn nection has been est ablished.
To c onfigure Remote Adm ministration follow the
Click "Enable HTTP" to ac
Chang ge the Remote Admi
If you wish to use Telnet o
You m may change the remo
Click "Save"
Note: The p password will only be
The WAN IP address bel ow is an example on
The steps below illustrate e how to access the r
1. Open a new brow ser window (e.g. Inte
2. In the address bar r, enter the router's W
YML L6908
www w.netcommwireless.c com
59
ystem" menu followed d by "Administration" .
are able to access th he router's web-base ed configuration page
o the WAN IP addres s of the router on the e port assigned in the
e steps below:
tivate Remote Admin nistration
nistration Port numbe er if required; the fac ctory default is 8080.
r ping the router sele ect these options.
ote access password for enhanced secur rity.
changed if you ente er two matching pass swords. It is not neces
ly, yours will be diffe rent.
h http://10.10.0.10:80
Username
Password
h http://10.10.0.10:80
Username
Password
router's configuration n page remotely (from m a remote computer
ernet Explorer, Firefox x, Safari ...).
WAN IP address and assigned port numb er, e.g. "10.10.10.10
es from a remote loca ation to make configu
e configuration page (e.g. 8080) after a co
ssary to change the password if you are o
Figur re 71: System – Adm ministration
80
admin
admin
Table 16: Remote A Admin Login Details
90
root
admin
Table 17: Remo ote Root Login Deta
r):
: 8080".
uration changes and to enable or disable
onnection to the cellu ular network via a dat ta
only changing the inc coming port number. .
s
ails
NTC-6000 Series U User Guide