Windows Me Pcs - NetComm NB4 User Manual

Windows ME PCs

1. In the Windows task bar, click the Start button, point to Settings, and then click Control
Panel.
2. Click on View All Control Panel Options.
3. Double-click the Network icon.
4. The Network Properties dialog box displays with a list of currently installed network
components. If the list includes Internet Protocol (TCP/IP), then the protocol has already
been enabled. Skip to step 10.
5. If Internet Protocol (TCP/IP) does not display as an installed component, click Add...
6. In the Select Network Component Type dialog box, select Protocol, and then click
Add...
7. Select Microsoft in the Manufacturers box.
8. Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click OK. You
may be prompted to install files from your Windows ME installation CD or other media.
Follow the instructions to install the files. If prompted, click OK to restart your computer
with the new settings.
Next, configure the PC to accept IP information assigned by the NB4 ADSL Modem
Router:
9. Follow steps 1 – 4 above..
10. In the Network Properties dialog box, select TCP/IP, and then click Properties.
If you have multiple TCP/IP listings, select the listing associated with your network card or
adapter.
11. In the TCP/IP Settings dialog box, click the radio button labeled Obtain an IP address
automatically.
12. Click OK twice to confirm and save your changes, and then close the Control Panel.
NB4 User Guide
12
YML733Rev1
www.netcomm.com.au