Appendix A: Installing UPnP in
Windows Example
This section shows how to install UPnP in Windows Me and Windows XP.
Installing UPnP in Windows Me
Follow the steps below to install the UPnP in Windows Me.
Step 1.
Click Start and Control Panel. Double-click Add/Remove Programs.
Step 2.
Click on the Windows Setup tab and select Communication in the Components selection box. Click Details.
Step 3. In the Communications window, select the Universal Plug and Play check box in the Components selection box.
Step 4. Click OK to go back to the Add/Remove Programs Properties window and click Next.
Step 5. Restart the computer when prompted.
YML14WN
www.netcomm.com.au
NetComm Gateway Series - ADSL2+ Modem Router
ADSL2+ Modem Router User Guide
47