Remote; Remote Functions - Roland M-200i V-mixer Owner's Manual

Remote

Remote functions

MIDI
You can use the rear panel MIDI IN/OUT connectors to remotely
control the M-200i from an external device, or control an external
device from the M-200i. You can use either MIDI or RS-232C, not
both.
In order to use MIDI, go to the REMOTE screen and set "RS-232C/
MIDI SELECT" to MIDI.
MIDI can transmit and receive the following messages:
Message Explanation
Control change Control of channel faders and
mute
Program change Recall scene memories
System exclusive Control of mixer parameters
MMC Control of the USB memory
recorder
USB MIDI
By connecting the rear panel USB port to a PC, you can use USB
MIDI to remotely control the M-200i.
USB MIDI can transmit and receive the following messages:
Message Explanation
Control change Control of channel faders and
mute
Program change Recall scene memories
System exclusive Control of mixer parameters
MMC Control of the USB memory
recorder
You'll need to install the USB MIDI driver on the PC that's to be
connected to the M-200i using USB. Download the USB MIDI
driver from the Roland website below:
http://www.rolandsystemsgroup.net/
106
The M-200i can be remotely controlled from M-200iRCS via its
rear panel USB connector. M-200iRCS is application software
that runs on Windows PC or Mac. It allows you to edit M-200i
project files and to remotely control the M-200i. You can obtain
the "M-200iRCS" software and the "M-200iRCS Users Guide"
(PDF version) from the Roland website listed below. For details
on using M-200iRCS, refer to the "M-200iRCS Users Guide."
RS-232C
Transmitted/
Received
You can use the RS-232C connector located on the rear panel to
Transmitted/
control the M-200i from an external computer or other device.
Received
For details on the RS-232C commands, refer to the "M-200i RS-
Transmitted/
232C Reference" (PDF version), which you can obtain from the
Received
Roland website listed below:
Transmitted/
Received
Received only
To use RS-232C, go to the REMOTE screen and set "RS-232C/
MIDI SELECT" to RS-232C.
V-LINK
If you connect a V-LINK compatible video device such as the V-
1600HD to the rear panel MIDI IN connector, you'll be able to use
your video device to control the volume of specific channels.
Transmitted/
Received
The M-200i allows up to 16 audio sources to be controlled via
VLINK.
Transmitted/
Received
The following V-LINK compatible video devices can be connected
Transmitted/
to the M-200i:
Received
• V-440HD (Ver. 2.07 or later)
Transmitted/
• V-8
Received
• LVS-800
Received only
• V-1600HD
• V-800HD
In order to use V-LINK, go to the REMOTE screen and set "RS-
232C/MIDI SELECT" to MIDI.
The M-200i can use MIDI and USB MIDI simultaneously. If the
same message is received via both MIDI and USB MIDI, the last-
received message will be used.
http://www.rolandsystemsgroup.net/
http://www.rolandsystemsgroup.net/