Adjusting The Brightness Of The Display And Panel; Date&Time Setting - Roland M-200i V-mixer Owner's Manual

System settings
Adjusting the brightness of the
display and panel
You use the DISPLAY/PANEL screen to adjust the settings of the
panel and display.
1.
Access the SYSTEM screen.
2.
Select "DISPLAY/PANEL" and press [ENTER].
The DISPLAY/PANEL screen is displayed.
You can make the settings for the following values:
DISPLAY
CONTRAST
1
This adjusts the contrast of the display.
BRIGHTNESS
2
This adjusts the brightness of the display.
PANEL
BRIGHTNESS
1
This adjusts the brightness of the panel buttons and meters.
112
Date&time setting
Use the DATE&TIME popup of the SYSTEM screen to set the date
and time.
1.
Access the SYSTEM screen.
fig.ScrSystem.eps
2.
Select "DATE/TIME" and press [ENTER].
fig.ScrSysDateTimeGuide.eps
The DATE/TIME screen is displayed.
HOUR
1
This specifies the current hour in a range of 0–23.
MINUTE
2
This specifies the current minute in a range of 0–59.
SECOND
3
This specifies the current second in a range of 0–59.
YEAR
4
This specifies the year in a range of 2000 to 2099.
MONTH
5
This specifies the month in a range of 1–12.
DATE
6
This specifies the date in a range of 1–31.
FORMAT
7
This selects the format of the date.
You can choose one of the following formats:
MM/DD/YYYY Month/Date/Year
DD/MM/YYYY Date/Month/Year
YYYY/MM/DD Year/Month/Date
3.
Use the value dial to set each item.
4.
Pressing SET button to apply the settings.