Usb Memory Recorder; About The Usb Memory Recorder; Recorder Screen - Roland M-200i V-mixer Owner's Manual

USB memory recorder

About the USB memory recorder

The M-200i provides a two-track recorder function that uses USB
memory. This function allows you to choose any two sources
from AUX1–8, MTX1–4, MAIN L/R and MAIN MONO, and record
the audio signal to USB memory as a WAV file, or to play back a
WAV file from USB memory.
About WAV files
The recorded WAV files will be in the following formats:
The sampling frequency of the recorded WAV file will be the
same as the sampling frequency of the M-200i.
Sampling frequency Bit depth
48 kHz 16 bits
44.1 kHz 16 bits
WAV files in the following formats can be played:
If the sampling frequency of the WAV file differs from the
sampling frequency of the M-200i itself, the file will be resampled
and played back.
Sampling frequency Bit depth
48 kHz 16 bits
48 kHz 16 bits
44.1 kHz 16 bits
44.1 kHz 16 bits
The M-200i cannot display filenames that use multi-byte
characters such as Japanese.
Location of the WAV files
WAV files will be recorded in the "/RSS/M-400/SONGS" folder of
the USB memory, and WAV files in the same folder can be played.
fig.RcdrFiles.eps
USB MEMORY
RSS
M-400
Do not disconnect the USB memory or power-off the M-200i
while data is being saved to USB memory. Doing so may
damage the data saved on USB memory.
Number of channels
2 channels
2 channels
Number of channels
1 channel
2 channels
1 channel
2 channels
SONGS
WAV FILE 1
WAV FILE 2
WAV FILE n

RECORDER screen

You use the RECORDER screen to make settings for the USB
memory recorder.
1.
In the DISPLAY section, press [USB REC].
The RECORDER screen is displayed.
The following contents are shown:
WAV file number
1
This indicates the alphabetical order of the WAV files.
WAV file name
2
This indicates the name of the WAV file currently being
recorded or currently selected for playback.
Time indicator
3
This indicates time information for the WAV file currently
being recorded or played.
Playback mode
4
This indicates the playback mode. The following playback
modes are provided:
• Play one song
• Repeat one song
• Play to the last song
• Repeat all songs
REMAIN
5
If a WAV file is playing, this indicates the remaining playback
time of the WAV file.
During recording, this indicates the remaining amount of
time that can be recorded to USB memory.
RECORDER source
6
This indicates input-source for the USB memory recorder.
Meters
7
During recording, this indicates the recording level of the
USB memory recorder.
During playback, this indicates the playback level of the USB
memory recorder.
77