Effects Screen - Roland M-200i V-mixer Owner's Manual

EFFECTS screen

1.
In the top panel's DISPLAY section, press the [EFFECT]
button.
The EFFECTS screen appears.
You can use the up and down cursor buttons to change the
effect number.
1 FX1-4
Library name
1
The upper line shows the library name, and the lower line
shows the effect type name.
When the effect type is GEQ, the GEQ overview is displayed.
EDIT button
2
Pressing [ENTER] accesses the FX EDIT screen for the effect.
LIB button
3
Pressing [ENTER] access the FX LIBRARY screen.
INSERT/SOURCE indication
4
This shows the input-source for the effect.
1 LINK indication
This indicates the link status of the effect.
2 BYPASS indication
This indicates the bypass status of the effect.
3 INSERT/SOURCE indication
This shows the input-source for the effect.
Meters
5
This shows the input/output levels of the effect.
Effects,GEQ,External effects
2 EXT FX1-4
INSERT indication
1
This shows the input-source for the external effect.
EXT FX ON button
2
This enables or disables the EXT FX.
SEND LEVEL knob
3
This adjusts the output level to the external effect in a range
of -Inf dB - +6.0 dB.
The ASSIGNABLE OUT jack is fixed at a nominal output level of
+4 dBu. The SEND LEVEL knob adjusts the output level in the
digital domain.
RETURN LEVEL knob
4
This adjusts the input level from the external effect in a
range of -Inf dB - 6.0 dB.
When you're using it for insertion of an external effects device,
the INPUT jack's nominal input level is fixed at +4 dBu.
The RETURN LEVEL knob adjusts the input level in the digital
domain.
Meters
5
This shows the input/output levels of the external effect.
65