Channel Function Screen - Roland M-200i V-mixer Owner's Manual

CHANNEL FUNCTION screen

1.
Access the CHANNEL EDIT screen for the desired channel.
2.
Press [FUNC] to access the CHANNEL FUNCTION screen.
The operations available at the CHANNEL FUNCTION screen are
as follows:
LINK Turns channel link on/off (p. 37).
NAME EDIT Specifies the channel name.
PATCHBAY Accesses the PATCHBAY screen (p. 87).
GROUP Assigns channels to DCA groups (p. 61)and mute
ASSIGN groups (p. 62).
This adjusts the input level in the digital
ATT
domain.
This specifies the position from which the
DIRECT OUT
direct out signal is taken (p. 38).
POINT
COPY Copies channel settings to the clipboard.
PASTE When channel settings have been copied to the
clipboard, this pastes the settings from the
clipboard.
UNDO This undoes the last-performed parameter paste
operation. It is not displayed when there is no action
to undo.
LIBRARY Accesses the CH LIBRARY screen.
PEAK CLEAR Clears the level meter's peak hold or over indication.
HOME Selects the unit's Home screen.
SCREEN
For information on, NAME EDIT, COPY, PASTE, UNDO, LIBRARY,
or PEAK CLEAR, go to "Basic operation," and refer to "Editing a
name"(p. 33), "Copy" (p. 28), "Paste" (p. 29), "Undo" (p. 29),
"Library" (p. 30), or "Peak clear" (p. 33).
For information on HOME SCREEN, go to "User Preference
settings," and refer to "Selecting the Home screen" (p. 95).
Input channel operations
Stereo-linking channels
Adjacent odd-numbered and even-numbered channels can be
stereo-linked so that their parameters have the same settings.
This is convenient when you're dealing with stereo sources.
1.
Access the CHANNEL FUNCTION screen for the channel
that you want to stereo-link.
2.
Move the cursor to "LINK" and press [ENTER].
A confirmation message appears, asking you to confirm the
stereo-link operation.
The options within this menu are explained below.:
Description
LINK (L->R) The parameters of the even-numbered channel are
set to the values of the odd-numbered channel.
LINK (L<-R) The parameters of the odd-numbered channel are
set to the values of the even-numbered channel.
3.
Moving the cursor to the LINK (L->R) or LINK (L<-R) and
pressing [ENTER] stereo-links the channels.
Pressing [EXIT] cancels the operation.
Stereo-linked parameters
The following parameters are linked by stereo link:
• Attenuator
• HPF
• Gate/expander parameters other than Key In
• Compressor parameters other than Key In
• 4-band EQ parameters
• Fader parameters
• AUX/MTX sends
• Direct out point
When stereo link is enabled, the gate/expander and compressor
work in stereo.
37