Inserting An Effect Into A Channel; Inserting An Ext Fx Into A Channel - Roland M-200i V-mixer Owner's Manual

Effects,GEQ,External effects

Inserting an effect into a channel

Here we will explain the procedure for inserting the L side of FX1
into CH1.
1.
Access the EFFECTS FUNCTION screen.
2.
Move the cursor to the FX1 L SOURCE, and press [ENTER].
The FX1 L SOURCE screen will appear.
3.
Move the cursor to the CH1 INS, and press [ENTER] to
select it.
If you want to insert the effect into both channels of a stereo-linked
pair, make insert settings for both the L and R sides.
68
Inserting an EXT FX into a
channel
Here we will explain how to connect your external effects device
to ASSIGNABLE OUTPUT 7 and INPUT17, and insert it into CH1.
1.
Access the EXT FX1 screen.
2.
Move the cursor to the ON button for EXT FX1, and press
[ENTER] to turn on.
3.
Connect your external effects device to ASSIGNABLE
OUTPUT7 and INPUT17.
If you connect your external effects device while the ON
button for EXT FX1 is off, the input and output may loop.
If the EXT FX insert-destination is already specified when you
connect your external effects device, noise may be heard in
the channel.
4.
Access EFFECTS FUNCTION screen.
5.
Move the cursor to the EXT FX1 SOURCE, and press
[ENTER].
The EXT FX1 SOURCE screen will appear.
6.
Move the cursor to the CH1 INS, and press [ENTER] to
select it.
To adjust the input/output level to the external effect, you'll use
the EFFECTS screen.