Recorder Function Screen; Using The Usb Memory Recorder - Roland M-200i V-mixer Owner's Manual

USB memory recorder
Pressing buttons executes the following action at RECORDER
screens.
Button Function
REW This selects the previous WAV file.Holding this down
during playback rewinds the WAV file being played.
FF This selects the next WAV file.Holding this down
during playback fast-forwards the WAV file being
played.
REC This puts the USB memory recorder into recording
standby.
PLAY This plays the WAV file selected as the current song.
STOP

RECORDER FUNCTION screen

1.
Access the RECORDER screen.
2.
Press [FUNC] to access the RECORDER FUNCTION screen.
The operations available at the RECORDER FUNCTION screen are
as follows:
SONG LIST Shows the WAV files in the SONGS folder (p. 78).
PLAY MODE Cycles through the available playback modes.
REC LEVEL This adjusts the recording level of the USB memory
recorder in a range of -Inf dB to +10.0 dB.
REC L SOURCE These select the input sources for the USB memory
recorder (p. 79).
REC R SOURCE
PLAY L
DESTINATION These select the output destinations for the USB
memory recorder (p. 79).
PLAY R
DESTINATION
PEAK CLEAR Clears the level meter's peak hold or over indication.
For information on PEAK CLEAR, go to "Basic operation," and
refer to "Peak clear" (p. 33).
78

Using the USB memory recorder

Editing the song list
The song list shows the WAV files located in the "/RSS/M-400/
SONGS" folder of USB memory in the order of their name.
1.
Access the RECORDER screen.
2.
Select "SONG LIST" and press [ENTER].
The SONG LIST screen is displayed.
The following items are displayed :
WAV file number
1
This indicates the alphabetical order of the WAV files.
WAV file name
2
This indicates the name of the WAV file currently being
recorded or currently selected for playback.
Time indicator
3
This indicates time information for the WAV file currently
being recorded or played.
3.
Select the desired WAV file, and press [ENTER].
A popup will appear.
The operations available at this popup are as follows:
PLAY (STOP) Plays the WAV file. (If a WAV file is playing, "STOP" will
appear.)
DELETE Deletes the WAV file.
NAME EDIT Access the NAME EDIT screen, where you can edit
the name of the WAV file.
For information on how to edit the name, refer to "Editing a
name" (p. 33).