Compressor/Limiter Screen; Compressor/Limiter Operations - Roland M-200i V-mixer Owner's Manual

COMPRESSOR/LIMITER screen

Compressor/Limiter operations

Compressors are provided on CH1-32, AUX 1-8, MTX1-4 and MAIN L/R.
They apply a user-adjustable ratio of attenuation to input signals that exceed the threshold level.
fig.CompCurve.eps
(KNEE=HARD, GAIN=0.0dB, AUTO GAIN=OFF)
THRESHOLD
INPUT LEVEL
Limiters are provided on each AUX1-8, MTX1-4, and MAIN L/R.
They attenuate the signal so that the output does not exceed the threshold level.
(KNEE=HARD)
THRESHOLD
INPUT LEVEL
You can select either compressor or limiter for AUX1 through 8, MTX1 through 4, and MAIN L and R.
By default, the compressor is selected.
The insert point varies according to the type selected.
For more details about insert points, refer to "Block Diagram" on the final page.
The COMPRESSOR screen is used to perform compressor operations, and the LIMITER screen is used to perform limiter operations.
INPUT SIGNAL
OUTPUT SIGNAL
RATIO
INPUT SIGNAL
OUTPUT SIGNAL
49