Remote Control
MIDI Settings
MIDI Window
In the MIDI window, you make settings for MIDI and USB MIDI.
To display the MIDI window, go to the SYSTEM window and tap
<REMOTE>, then tap <MIDI>.
Two tabs are displayed.
5 MIDI tab
Here you make settings for the MIDI connector.
5 USB MIDI tab
Here you make settings for MIDI communication via the USB
COMPUTER connector.
MIDI Window MIDI Tab
Selects whether the MIDI OUT/THRU connector is
MIDI OUT/THRU
used as a MIDI OUT or MIDI THRU connector.
Sets the M-5000's device ID.
DEVICE ID
This setting is shared by MIDI and USB MIDI.
CONTROL CHANGE (FADER, MUTE)
RECEIVE
When this is on, control changes are received.
SEND
When this is on, control changes are sent.
PROGRAM CHANGE (SCENE)
RECEIVE
When this is on, program changes are received.
SEND
When this is on, program changes are sent.
MMC (USB MEMORY RECORDER)
RECEIVE
When this is on, MMC commands are received.
MIDI Window USB MIDI Tab
Sets the M-5000's device ID.
DEVICE ID
This is setting is shared by MIDI and USB MIDI.
CONTROL CHANGE (FADER, MUTE)
RECEIVE
When this is on, control changes are received.
SEND
When this is on, control changes are sent.
PROGRAM CHANGE (SCENE)
RECEIVE
When this is on, program changes are received.
SEND
When this is on, program changes are sent.
MMC (USB MEMORY RECORDER)
RECEIVE
When this is on, MMC commands are received.
RS-232C settings
RS-232C Window
In the RS-232C window, you set the communication speed for the
RS-232C interface.
To display the RS-232C window, go to the SYSTEM window and tap
<REMOTE>, then tap <RS-232C>.
Selects the RS-232C communication speed from
among the following.
5 4.8k bps
5 9.6k bps
5 14.4k bps
RATE
5 31.25k bps
5 38.4k bps
5 57.6k bps
5 115.2k bps
215