Display Section; Screen Controller Section - Roland M-200i V-mixer Owner's Manual

Explanation of the panels

DISPLAY section

6
fig.FunctionSectGuide.eps
1
3
5
7
METER button
1
This button accesses the METER screen, which displays a list
of meters.
"Metering" (p. 59)
SETUP button
2
This button accesses the SETUP screen for making various
settings.
"SETUP screen" (p. 80)
DCA button
3
This button accesses the DCA GROUP screen for
manipulating and making settings for DCA groups.
"DCA groups" (p. 60)
MUTE button
4
This button accesses the MUTE GROUP screen for
manipulating and making settings for mute groups.
"Mute groups" (p. 62)
EFFECT button
5
This button accesses the EFFECTS screen, for manipulating
and making settings for internal-effect and external-effect
instruments.
"Effects,GEQ,External effects" (p. 64)
GEQ button
6
This button accesses the GEQ screen, for manipulating and
making settings for internal GEQ.
"Effects,GEQ,External effects" (p. 64)
20
2
4
6
8
SCENE button
7
This button accesses the SCENE screen, where you manage
the scene list.
"Scene memory" (p. 74)
USB REC button
8
This button accesses the RECORDER screen for making
recorder settings and managing the song list.
"USB memory recorder" (p. 77)

Screen controller section

7
fig.GenCtrlSectGuide.eps
5
2
3
Cursor buttons
1
These buttons move the cursor and the location of focus up/
down/left/right within the screen.
Value dial
2
This adjusts the value of the parameter at which the cursor is
located.
EXIT button
3
This button exits the currently displayed screen and returns
you to the home screen.
ENTER button
4
Use this button to turn an on-screen button on or off, or to
confirm a change you've made to a setting.
FUNC button
5
This button has the following two functions:
• Accessing the FUNCTION screen for detailed control of
functions at their respective setting screens.
• Modifying the range by which a value changes when you
manipulate it, allowing for finer detail, by holding down
[FUNC].
1
4