Main Fader Module; Display; Channel Edit Section - Roland M-200i V-mixer Owner's Manual

Main fader module

3
fig.MainFaderModGuide.eps
1
2
3
4
SEL button
1
This button selects the MAIN channel so that it can be
controlled. It lights up when the MAIN channel is selected.
By repeatedly pressing the [SEL] button, you can alternatingly
select first the MAIN L channel, then the MAIN R channel.
SOLO button
2
This button turns solo on or off for the MAIN L and R
channels. The button lights up when solo is on.
Mute button
3
These turn muting on or off for MAIN L and R channels. The
button lights up when MAIN L and R channels are muted.
If "DISABLE MAIN MUTE" in the System Settings (p. 111) is ON,
this button is disabled.
Fader
4
This adjusts the signal level of the MAIN L and R channels.
Meter
5
This indicates the signal level of the MAIN L and R channels.
"About the meters" (p. 59)
5
Explanation of the panels

Display

4
This display indicates the mixer parameters and system settings,
as well as displaying a list of the meters.

CHANNEL EDIT section

5
fig.DisplayGuide.eps
1
2
5 4
In this section, you can access the respective screens for working
with the parameters of the currently selected channel.
EDIT button
1
This button accesses the CHANNEL EDIT screen.
"Input channel operations" (p. 34), "AUX, MTX, MAIN operations"
(p. 39)
GATE button
2
This button accesses the GATE/EXPANDER screen.
This operation is not enabled for the following channels:
• AUX1 - 8
• MTX1 - 4
• MAIN L/R
"GATE/EXPANDER screen" (p. 45)
COMP button
3
This button accesses the COMPRESSOR/LIMITER screen.
"COMPRESSOR/LIMITER screen" (p. 49)
EQ button
4
This button accesses the EQ screen.
"4-BAND EQ" (p. 55)
SEND button
5
This button accesses the SENDS screen.
"SENDS screen" (p. 58)
3
19