About The Remote Controller; Connecting A Dedicated Remote Controller; Connecting A Computer - Roland S-4000M Owner's Manual

Reac merge unit

Hide thumbs Also See for S-4000M:

Table of Contents

About the Remote Controller

You can connect a dedicated digital-snake remote controller (S-4000R) to the REMOTE connector.

You can use this to adjust preamp gain and switch phantom power on and off for digital snake devices connected to the

S-4000M. The S-4000R supports control of up to 40 channels.

When the S-4000M is set to THRU mode, the REMOTE connector is inactive.

fig.connect-S4000R.eps

For information on the settings you can control remotely using the S-4000R, refer to the owner's manuals for the respective

digital snake devices.

Installing dedicated remote control software on a computer and connecting it to the REMOTE connector lets you perform remote

control from the computer. As with the S-4000R, you can use this to adjust preamp gain and switch phantom power on and off for

digital snake devices connected to the S-4000M.

When the S-4000M is set to THRU mode, the REMOTE connector is inactive.

fig.connect-PC.eps

You can download the dedicated remote control software (S-4000 RCS) and the user guide from the following Roland website.

http://www.rolandsystemsgroup.net/

* Refer to the User Guide of S-4000 RCS for details of system requirements and operations.

Table of Contents