User Preference Settings; User Preference Screen; Editing The User Fader Layers - Roland M-200i V-mixer Owner's Manual

User Preference settings

Here you can make the settings for the user fader layers, user
buttons and other user preferences.

USER PREFERENCE screen

1.
In the top panel's DISPLAY section, press [SETUP].
2.
AT the SETUP screen, select "USER PREFERENCE" and
press [ENTER].
The USER PREFERENCE screen is displayed.
The following functions are available at the USER PREFERENCE
screen.
- USER LAYER 1-2
1 2
This edits the user fader layer assignments (p. 94).
USER BUTTON
3
This edits the user button assignments (p. 95).
CH-SELECT OPTION
4
This selects operations related to channel selection.
Operations displayed with "ON" are enabled.
The selection items are as follows:
CH-SELECT Channels are selected by [SOLO]
FOLLOW [SOLO]
CH-SELECT WITH The channel selection for each layer is saved in
LAYER SEL memory, and the selected channels are changed
using the buttons in the LAYER section.
CH-EDIT Pressing [SEL] accesses the CHANNEL EDIT screen.
FOLLOWS [SEL]
CONFIRMATION
5
This selects the operations that display a CONFIRM popup.
When you perform an operation that's displayed with "ON"
here, a CONFIRMATION popup that prompts you to confirm
the operation is displayed.
The selection items are as follows:
SCENE/LIBRARY STORE Scene or library store operations
SCENE/LIBRARY RECALL Scene or library recall operations
PATCHBAY CHANGE Changes to the input/output patchbay
HOME SCREEN
6
This selects the Home screen (p. 95).
94
STARTUP OPTION
7
This specifies scenes and layers in effect on powerup.
The parameters are as follows:
RECALL SCENE This specifies scenes in effect on powerup.
LAYER This specifies layers in effect on powerup.

Editing the user fader layers

The user fader layers are a function for assigning any channel to
the top-panel fader module section (p. 18). The unit has two user
fader layers, and you can assign any 16 channels to each user
layer.
Editing the user fader layer assignments
1.
Access the USER PREFERENCE screen.
2.
Select either "USER LAYER 1" or "USER LAYER 2"
according to the user fader layer whose settings you
want to make, and press [ENTER].
The USER LAYER screen appears.
3.
Move the cursor to the fader whose settings you want to
make, then press [ENTER].
The USER FADER ASSIGN screen appears.
4.
Move the cursor to the channel you want to assign and
press [ENTER].
5.
Press [EXIT] to quit the screen.
You can also assign a user fader by pressing [SEL] for the fader
instead of pressing [ENTER] at the user fader selection screen.