Effects Function Screen; Effect Input/Output Settings - Roland M-200i V-mixer Owner's Manual

Effects,GEQ,External effects

EFFECTS FUNCTION screen

1.
Access the EFFECTS screen.
2.
Press [FUNC] to access the EFFECTS FUNCTION screen.
The operations available at the EFFECTS FUNCTION screen are as
follows:
FX 1-4 L/R This sets the input source for the specified FX.
SOURCE
FX 1-4 L/R This sets the output destination for the specified FX.
DESTINATION
BYPASS FX This turns bypass on/off for the specified FX.
1-4 L/R When these are on, the input signal will be "thru-ed"
to the output.
LINK FX 1-4 This links the parameters between the L and R sides.
The following effect types support LR LINK:
• DELAY x2
• P.SHIFTER x2
• CH STRIP x2
• SPH-323 x2
EXT FX 1-4 This selects the channel into which the external
INSERT effect will be inserted.
66

Effect input/output settings

You use the EFFECTS FUNCTION screen to select the input source
and output destination for the effect.
Setting the input source for an effect
1.
Access the EFFECTS FUNCTION screen.
2.
Move the cursor to the FX 1-4 SOURCE, and press
[ENTER].
The FX SOURCE screen will appear.
3.
Select the desired channel and press [ENTER].
Setting the output destination for an
effect
1.
Access the EFFECTS FUNCTION screen.
2.
Move the cursor to the FX 1-4 DESTINATION, and press
[ENTER].
The FX DESTINATION screen is displayed.
3.
Select the desired channel and press [ENTER].
4.
Press [EXIT] to quit the screen.
You can select more than one output-destination channel for an
effect.
When used for Inserting an effect into a channel,
"DESTINATION" is not displayed on the FX PATCH screen.