Fader Module Section; Layer Section - Roland M-200i V-mixer Owner's Manual

Explanation of the panels

Fader module section

1
fig.FaderModSectGuide.eps
1
2
3
4
5
This section lets you control the 16 channels you selected in the

LAYER section.

SEL buttons
1
Use these buttons to select the channel that you want to
control. The [SEL] button of the currently selected channel
lights up.
SOLO buttons
2
These buttons turn solo on or off for each channel. The
button lights up when solo is on.
"Monitor/Solo" (p. 92)
Meters
3
These indicate the signal level of each channel.
"Metering" (p. 59)
MUTE buttons
4
These turn muting on or off for each channel. The button
lights up when a channel is muted.
Faders
5
These adjust the signal level of each channel.
18
LAYER section
2
fig.LayerSectGuide.eps
1
2
3
4
5
This section lets you select the channel layer to be assigned to
the fader module section. The button of the currently assigned
channel layer lights up.
USER2 layer button
1
USER1 layer button
2
These assign user fader layer 1 or user fader layer 2 to the
fader module section.
"Editing the user fader layers" (p. 94)
AUX/MTX/DCA layer button
3
This assigns AUX1 through 8, MTX1 through 4, and DCA1
through 4 to the fader module section.
CH 17 - 32 layer button
4
This assigns CH 17 through 32 to the fader module section.
CH 1 - 16 layer button
5
This assigns CH 1 through 16 to the fader module section.