11: Remote - Roland VR-6HD Reference Manual

Menu List

11: REMOTE

RC232
Value (bold text: default
Menu item
value)
These are the settings for transmitting/receiving RS-232 commands.
RS-232
OFF, ON
RS-232
9600, 38400,
BAUDRATE
TALLY/GPO
Value (bold text: default
Menu item
value)
These are settings for tally signals or control signals that are output from the TALLY/GPIO connector.
TALLY/GPO
TALLY, GPO, TALLY/GPO
TEMPLATE
Assigns the tally signal to TALLY/GPIO connector pins 1–16.
PGM VIDEO IN 1–6
PGM STILL 1–16
PGM VIDEO PLAYER
PGM INPUT 1–6
PST VIDEO IN 1–6
TALLY/GPO 1–16
PST STILL 1–16
PST VIDEO PLAYER
PST INPUT 1–6
Assigns the GPO to TALLY/GPIO connector pins 1–16.
GPO 1–16
132
Explanation
When this is "ON", RS-232 commands can be transmitted and received.
115200
Specifies the communication speed (bps) of the RS-232 connector.
Explanation
Selects a TALLY/GPO 1–16 settings template.
Press the [VALUE] knob to apply the template settings to "TALLY/GPO 1–16".
A tally signal is output when the video sent from the connector in question is the final output.
A tally signal is output when the still image in question is the final output.
A tally signal is output when the video signal from the video player is the final output.
A tally signal is output when the final output video is selected using the VIDEO SWITCHER button in
question (the button lights up red).
A tally signal is output when the video sent from the connector in question is the preview output.
A tally signal is output when the still image in question is the preview output.
A tally signal is output when the video signal sent from the video player is the preview output.
A tally signal is output when the preview output video is selected using the VIDEO SWITCHER button in
question (the button lights up green).
A control signal is output when you press the footswitch or assign a GPO output function to a GPI pin.