Screen Operations; On/Off Buttons - Roland M-200i V-mixer Owner's Manual

Screen operations

Basic screen structure
Title bar
1
This indicates the name of the screen currently shown in the
main display area.
Wireless LAN status display
2
This displays the status of the wireless LAN.
Display Description
Connected to the Wireless LAN router. The signal
strength (the strength of the radio waves from the
Wireless LAN router) is indicated by three bars.
A wireless USB adapter is attached, but no
connection to the Wireless LAN router is in effect.
No wireless USB adapter is attached.
Ad-hoc mode (p. 104)
Main display area
3
Most screen operations are performed in this area.
Cursor operations
The cursor is indicated by a flashing frame. You use the up, down,
left, and right keys to move the cursor.
Button operations
Buttons on the screen are used to turn a function on or off, to
execute a command, or to access a screen. To operate a button,
move the cursor to the desired button and press [ENTER].

ON/OFF buttons

These are used to turn a parameter or function on or off.
A button that is on appears as follows:
A button that is off appears as follows:
Action buttons
These buttons are used to access an associated screen or to
execute a function.
Knob/value operations
Use the value dial to manipulate setting values on the screen.
Move the cursor to the desired value, then carry out the
operation.
You can make more-detailed settings by holding down [FUNC] and
operating the value dial.
Basic operation
27