Port Configuration; Network And Voice Configuration - Net2Phone Max 410 User Manual

Max 410/420/430 User's Guide – Chapter 5

Port Configuration

In the Address Table Configuration table on the Port
Configuration page, you can assign a local address to
each port, allowing you to simulate a local PBX in which
the ports can easily communicate with each other.
To assign an address to a port:
1. Click the Port Configuration link on the Site
Map page or on the sidebar menu.
2. Click in the Local Address field corresponding
with the port number you would like to configure.
3. Enter the local address.
4. Click the Save button to save your setting.
Figure 12 – Port Configuration Page

Network and Voice Configuration

The Network and Voice Configuration Page contains four
separate tables:
Network Configuration
Voice Configuration
IP Configuration
CDR Configuration
To access the Network and Voice Configuration page,
click the Network and Voice Config link in the sidebar
34