Rear Brake Caliper Assembly - Honda CBR954RR 2002 Service Manual

ASSEMBLY
Coat the new piston seal with clean brake fluid.
Coat the new dust seal w i t h silicone grease.
Install the piston seal and dust seal into the groove of
the caliper body.
Coat the caliper piston with clean brake fluid and
install it into the caliper cylinder w i t h its opening end
toward the pad.
Install the pad spring into the caliper body.
If
the caliper and bracket pin boots are hard or deteri-
orated, replace them with new ones.
Apply silicone grease to the inside of the bracket pin
boot.
install the bracket pin boot and collar into the caliper.
HYDRAULIC BRAKE