Honda CBR954RR 2002 Service Manual page 133

$-
Connect the vehicle speed sensor
Disconnect the ECM connectors.
Connect the test harness to the wire harness
connectors.
Support the motorcycle securely and place the
rear wheel off the ground.
Shift the transmission into gear.
Measure the voltage at the test harness termi-
nals with the ignition switch turned t o "ON"
while slowly turning the rear wheel by hand.
-
CONNECTION: B16 Ground
STANDARD: Repeat 0 to 5V
3P connector.
Abnormal
Normal
FUEL SYSTEM (Programmed Fuel Injection)
Open or short circuit in Pink/Green wire
5-25